How does the fully automatic pipe bending machine actually operate?

Do you know how the automatic pipe bending machine actually works? If you don't know, you can learn about it now!

1. The automatic pipe bending machine is mainly suitable for laser cutting of slightly thicker product workpieces. Select the "thickness selection" switch position.

2. After removing the cutting torch roller, the cutting torch is firmly connected to the automatic pipe cutting machine, and the connecting parts are prepared in the optional accessories.

3. Connect the power supply of the machine, and install the slide rail or radius rod according to the shape of the product (if it is a slide rail for linear cutting, if you want to cut a circle or arc, you can use a radius rod).

4. Unplug the power plug of the cutting torch and replace it with a remote control power plug (always available in the optional accessories).

5. According to the thickness of the workpiece, adjust the appropriate movement speed, and set the "reverse" and "forward" switches in the machine to the cutting direction.

6. Adjust the distance between the nozzle and the workpiece to 3 to 8 mm, and then adjust the middle of the nozzle to the start and end strips of the workpiece slit.

7. Turn on the remote control switch, cut through the workpiece, turn on the main power switch of the machine, and you can cut.

The above is the actual operation method of the fully automatic pipe bending machine, you can learn about it!